The GV-GF Fingerprint Reader works with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system.
With the GV-GF Fingerprint Reader only, you can also enroll and manage users through the supplied Manager Enroll Card and Delete Card, along with optional MIFARE user cards.
FEATURES
Work with GV-AS / GV-EV Controller and GV-ASManager
Three types of access modes: card only, fingerprint only and card plus fingerprint
Fingerprint templates stored on the user card
Three types of communication interfaces: Wiegand 26, RS-485 and TCP/IP (LAN)
SPECIFICATIONS
Models
GV-GF1911
GV-GF1912
Application
Indoor use only
Communication Interface
Wiegand 26, RS-485, TCP/IP (LAN)
Sensor
Capacitive
Optical
Sensing Area (H x W)
18 x 13 mm / 0.71 x 0.51 in
20 x 17 mm / 0.79 x 0.67 in
Operation Mode
Fingerprint Only, Card + Fingerprint, Card Only
Number of Fingerprints Stored
1,900 (for Fingerprint Only mode)
Supported Card
ISO14443A , and , 13.56 MHz
Output
DC 24V, 2.5A
Power
DC 7.5V~12V, Max 250mA
Operating Temperature
0~50° C / 32~122° F
Humidity
10%~90%
Dimensions (H x W x D)
130 x 54 x 43 mm (5.12 x 2.13 x 1.69 in)
130 x 54 x 38 mm (5.12 x 2.13 x 1.50 in)
Weight
130 g (0.29 lb)
160 g (0.35 lb)
Certification
CE, FCC
Note:
1. For Card + Fingerprint Mode and Card Only Mode, it is required to purchase GeoVision's cards and tags to work with.
2. Data synchronization with GV-AS Controller and GV-ASManager through LAN is only supported
when the following controller firmware version and software version work together:
* GV-ASManager: V4.0 or later
*
GV-AS100 / 110 / 120: V1.06 or later
*
GV-AS400: V1.04 or later
*
GV-AS210 / 810: V1.0 or later
* GV-AS410: V1.1 or later
3. All specifications are subject to change without prior notice.
For Card + Fingerprint Mode, the GV-AS ID F Card or GV-AS ID F Tag is required. For Card Only Mode, both the GV-AS ID F Card / Tag and the GV-AS ID Card / Tag are supported.
The GV-Hub V2 adds four RS-232/RS-485 serial ports through the computer's USB port, allowing connection between the fingerprint reader and the computer.
The GV-COM V2 can convert the standard RS-232 signal, through USB connector, to RS-485 signal, allowing connection between the fingerprint reader and the computer.
The GV-NET/IO Card is a RS-485 / RS-232 interface converter that provides 4 inputs and 4 relay outputs. Using the GV-NET/IO Card, you can connect the fingerprint reader to the computer.
PC Service Package
The package includes a USB cable for connecting the fingerprint reader to a computer and a reader mount to hold the reader for fingerprint enrollment.
