The version history applies to the following firmware version for each device:
GV-AS210 firmware V1.1.0
GV-AS810 firmware V1.1.0
New:
Input state setting on Web interface to set input devices to NO or NC circuit
Support for connecting to GV-CR420 V1.0.1 using MAC address
LED indicator on GV-CR420 V1.0.1 turning into a solid pink light when network connection is interrupted
Support for GV-GF1921 / 1922
Fixed:
Door remains open 1 second longer than the specified lock reset time
Failure to trigger output device when the reader is using network connection, output type is set to Normal type, and output is set to trigger upon card swipe
Failure to record output trigger to I/O Log in ASWeb when the output is set to Normal type and trigger upon card swipe
GV-ASController, GV-ASBox and GV-ASNet Version History:
Firmware Update 2012-10-23
The version history applies to the following firmware version for each device:
GV-AS100 V1.06
GV-AS110 V1.06
GV-AS120 V1.06
GV-AS400 V1.04
GV-ASBox V1.06
GV-ASNet V1.06
GV-AS100 V1.06
New:
Support for Card and Face Mode by schedule (For GV-CR420)
Support for Release All Doors by Card function
Fixed:
Unlocking of doors after presenting Patrol Cards
GV-AS110 V1.06
New:
Support for Card and Face Mode by schedule (For GV-CR420)
Support for Release All Doors by Card function
Fixed:
Unlocking of doors after presenting Patrol Cards
Failure of Global Anti-Passback function
GV-AS120 V1.06
New:
Support for Card and Face Mode by schedule (For GV-CR420)
Support for Release All Doors by Card function
Fixed:
Unlocking of doors after presenting Patrol Cards
Failure of Global Anti-Passback function
GV-AS400 V1.04
New:
Support for Card and Face Mode by schedule (For GV-CR420)
Support for receiving card numbers from GV-CR420, GV-GF1911 and GV-GF1912 through network connection
Support for Release All Doors by Card function
Support for Urgent Card function
Fixed:
Unlocking of doors after presenting Patrol Cards
Problem with two-way gate caused by prolonged trigger time
GV-ASBox / GV-ASNet V1.06
New:
Support for receiving card numbers from GV-CR420, GV-GF1911 and GV-GF1912 through network connection
Firmware Update 2011-09-06
Firmware V1.05 includes the following models:
GV-AS100 / GV-AS110 / GV-AS120 (brand-new)
GV-ASBox / GV-ASNet
Firmware V1.03 includes the following models:
GV-AS400
GV-AS100 V1.05
New:
Support for Mifare DESFire, Mifare Plus and Mifare Class cards
Support for only requiring access card to unlock entry or exit door under Card and PIN mode
GV-AS110 V1.05
New:
Support for Mifare DESFire, Mifare Plus and Mifare Class cards
Support for only requiring access card to unlock entry or exit door under Card and PIN mode
Fixed:
Visitor cards denied before deactivation time is passed
GV-AS400 V1.03
New:
I/O naming and recording upon output trigger
Support for only requiring access card to unlock entry or exit door under Card and PIN mode
GV-ASBox V1.05
New:
Support for Mifare DESFire, Mifare Plus and Mifare Class cards
GV-ASNet V1.05
New:
Support for Mifare DESFire, Mifare Plus and Mifare Class cards
Firmware Update 2010-12-13
The version history applies to the following firmware version for each device:
GV-AS100 V1.04
GV-AS200 V2.02
GV-AS400 V1.02
GV-ASBox V1.04
Note: Starting from this version, GV-AS100 and GV-ASBox will no longer share the same firmware.
New:
Support for GV-RK1352 Reader (GV-AS100/AS400)
Support for visitor card and related functions in GV-VMWeb (GV-AS100/AS200/AS400)
Support for handicap card (GV-AS100/AS200/AS400)
Support for release by card during release mode (GV-AS100/AS400)
Support for GV-ASNet (GV-AS100)
Support for I/O naming and I/O log (GV-AS100 and GV-ASBox)
GV-AS200 Controller Firmware V2.00 2009-05-07
Fixed:
Incorrect writing of card bits to GV-ASManager
Failure to transmit temporarily stored data to GV-ASManager after connection recovery
Failure to transmit events in a sequence to GV-ASManager
TCP/IP connection problem occurred when a large amount of data were transmitted GV-ASManager
Incorrect icon to indicate connection status which only occurred in TCP/IP connection
Improved:
The maximum value in "Held Open Time" increased from 255 sec. to 9999 sec.
Changed:
The process of loading defaults activated automatically after firmware update of GV-AS200 Controller
GV-ASController and GV-ASBox Ethernet Module Version History:
Firmware V2.0 2009-03-13
New:
Daylight Saving setting available through GV-ASKeypad
Back to home page automatically if any parameter settings are idle over 10 seconds on GV-ASKeypad
Fixed:
Password issue in “Card or Common Mode” that occurred when the password was odd numbers
Changed:
Range of Controller ID that was changed from 0 ~ 9999 to 1 ~ 255
Machine name on the configuration interface that will change automatically based on the setting of GV-ASManager
GV-RK1352 Card Reader Version History:
Firmware V1.10 2011-02-09
New:
Support for Mifare DESFire, Mifare Plus and Mifare Class cards
GV-CR420 Camera Reader Version History:
Firmware V1.01 2013-02-01
New:
Support for LED notification when network connection with GV-AS210 / 810 is interrupted
Support for Defog function
Support for Sample Rate and Bit Rate in Audio Settings
Support for Wide Dynamic Range function
Support for ONVIF function
Fixed:
Failure to apply modifications made to Flicker less setting after rebooting the device
Occasional unsmooth video in motion detected live view
Failure to update firmware when audio function is enabled
Changed:
Network connection with GV-AS210 / 810 is now established using MAC address instead of barcode
